Yazar arşivleri: ozturkgokhan

Morse Code Application with Altera FPGA Board -2-

hi everyone,

At my previous post i introduced my morse code project with fpga. Today you can examine the working princible of the project. It is in turkish but you can enable the subtitles of youtube video to english.

.
  .
gökhan öztürk

best wishes

Morse Code Application with Altera FPGA Board

Hi everyone,

it has been too long after my last post. Today i will make a morse code implementation with my project partner (besaltcizgi).

Morse code is a combinations of long and short signals. These signals can be like light, sound and etc. At our project we used both light (led) and sound (buzzer).

You can see my presentation video and after that post i wiil continue to share details and project codes.

best wishes

gökhan öztürk

 

An Arithmetic Logic Unit (ALU) Design in VHDL

Hi Everyone,

At my this post i will try to build an arithmetic logic unit (ALU). ALU is a programmed or electronics circuit that makes user-defined arithmetic or logic tasks. I designed this ALU for my school homework.

My user-defined processes as at the given table.

An arithmetic logic unit (ALU)

An Arithmetic Logic Unit Processes

At the program, i have two times 3 bits long inputs (6 bits totally). When the inputs are given, we choose the operation by “sel” bits. Then operation will be processed. “Y” is  my output, i took that output and send them to segment1 and segment2 outputs. These are for seven-segment display output. By the help of these segment you can see result

 

library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
use ieee.std_logic_unsigned.all;

entity ALU is

generic (width_data : integer :=4);

port(   a : in std_logic_vector  ( (width_data-2)  downto 0);
b : in std_logic_vector  ( (width_data-2)  downto 0);
sel : in std_logic_vector( (width_data-1)  downto 0);
y : inout std_logic_vector ( (2*width_data-1) downto 0);
segment1: out unsigned (6 downto 0);
segment2: out unsigned (6 downto 0)    );
end ALU;

architecture behavioral of ALU is
signal result : std_logic_vector((2*width_data-1) downto 0);
signal result1 : std_logic_vector((2*width_data-1) downto 0);
signal result2 : std_logic_vector((width_data-2) downto 0);

signal ax : std_logic_vector((2*width_data-1) downto 0):= "00000" & a ;
signal bx : std_logic_vector((2*width_data-1) downto 0):= "00000" & b;

begin

process (sel,a,b)
begin
case sel is
--sel(3) is 0
when "0000" => result <= ax ;
when "0001" => result <= ax + "001" ;
when "0010" => result <= ax - "001";
when "0011" => result <= bx;
when "0100" => result <= ax + bx;
when "0101" => result <= ax - bx;
when "0110" => result <= "00" & (a * b);
when "0111" => result <= "00000000";
--sel(3) is 1
when "1000" => result2 <= not a ;
when "1001" => result2 <= not b;
when "1010" => result2 <= a and b;
when "1011" => result2 <= a or b;
when "1100" => result2 <= a nand b;
when "1101" => result2 <= a nor b;
when "1110" => result2 <= a xor b;
when "1111" => result2 <= a xnor b;
end case;
end process;
result1 <= "00000" & result2;
y <= result when (sel(3)='0') else result1;

process(y)
begin
case y(3 downto 0) is
when "0000" => segment1 <= "1000000";
when "0001" => segment1 <= "1001111";
when "0010" => segment1 <= "0100100";
when "0011" => segment1 <= "0110000";
when "0100" => segment1 <= "0011001";
when "0101" => segment1 <= "0100100";
when "0110" => segment1 <= "0000010";
when "0111" => segment1 <= "0111000";
when "1000" => segment1 <= "0000000";
when "1001" => segment1 <= "0011000";
when "1010" => segment1 <= "0100000";
when "1011" => segment1 <= "0000011";
when "1100" => segment1 <= "1000110";
when "1101" => segment1 <= "0100001";
when "1110" => segment1 <= "0000110";
when others => segment1 <= "0001110";
end case;

case y(7 downto 4) is
when "0000" => segment2 <= "1000000";
when "0001" => segment2 <= "1001111";
when "0010" => segment2 <= "0100100";
when "0011" => segment2 <= "0110000";
when "0100" => segment2 <= "0011001";
when "0101" => segment2 <= "0100100";
when "0110" => segment2 <= "0000010";
when "0111" => segment2 <= "0111000";
when "1000" => segment2 <= "0000000";
when "1001" => segment2 <= "0011000";
when "1010" => segment2 <= "0100000";
when "1011" => segment2 <= "0000011";
when "1100" => segment2 <= "1000110";
when "1101" => segment2 <= "0100001";
when "1110" => segment2 <= "0000110";
when others => segment2 <= "0001110";
end case;

end process;
end behavioral;
--ozturkgokhan.com

Best wishes,

gökhan öztürk

Using Random Function Without Repetation and Lists in App Inventor 2

Hi,

Today i show you how to use “random random integer from” and “make a list” block. The aim of the program is, when i press to button1 i will get a random character from my list.  And these characters will not repeat theirselves.

11

At the top block, i made my variable declarations. Variable bbb is for the maximum value of list’s index. indexno is for the index’s number and datass is my list. Index starts from 1, for example index number of a is 1, and the index number of e is 5.

22

At this section, when i press the button1 it checks the value of bbb is equal to 1? Reason of that when the value of bbb is 1 it means when we press again button1 there won’t be any element at list. So when it equals to 1 , i make it disable to press.

“Remove from list” takes the certain indexed element from list and places its place with the next one. For example if he function takes the element that has the index number as 2, 3rd element will be the new 2nd element and 4 to 3 and also 5 to 4.

33

Now, we have disabled press buton and when we press reset, all values will download to the list. Also the maximum value of index. Because there will be no element of my list at the end of the program.

44

Designer Window

 

Screenshot_2016-04-02-12-04-20

Program Output -1-

Screenshot_2016-04-02-12-04-30

Program Output -2-

Good Luck,

gökhan öztürk